- #RCF RDNET CONTROL 2 INSTALL#
- #RCF RDNET CONTROL 2 SOFTWARE#
- #RCF RDNET CONTROL 2 PC#
- #RCF RDNET CONTROL 2 PLUS#
The TT 1-A II's Baltic birch plywood cabinet features built-in carry handles and a 35mm pole socket to grant ease of installation. Standard powerCON input and output jacks are employed for straightforward integration with typical power configurations.
#RCF RDNET CONTROL 2 SOFTWARE#
Two etherCON ports are available for connecting to RCF's RDNet protocol, which allows the speaker to be controlled by the RDNet software remotely. The rear panel offers an XLR input and XLR thru for daisy chaining to additional speakers. The onboard controls include gain reduction, RDNet setup/bypass, time delay, and presets for linear, close and far listening, and high-pass (for use with subwoofers).
#RCF RDNET CONTROL 2 PLUS#
Built-in DSP provides thermal and RMS protections plus a soft limiter. Onboard FirPHASE filters deliver optimum imaging and phase response with minimal latency.
The TT 1-A II utilizes a 1600W Class-D amplifier to power the 10" neodymium woofer and 1.4" compression driver, yielding a frequency response of 55 Hz to 20 kHz. The loudspeaker can be used as a stand-alone FOH system, a satellite (with subwoofer) or a stage monitor.
#RCF RDNET CONTROL 2 PC#
The loudspeaker objects are immediately added to the software synoptic as an object for each speaker (or any other audio device) found on the network.ĭOWNLOAD THE RDNet SOFTWARE for WindowsTM PC body span.Audio engineers and professional audio rental houses looking for a high-output and compact powered speaker with RDNet capabilities and professional-quality sound will be impressed with the black RCF TT 1-A II, a 10" 2-way 1600W active loudspeaker designed to offer accurate phase and wide frequency response for DJs, audio engineers, and rigging technicians in clubs, houses of worship, concert venues, and live stage applications. When online, the RDNet Control 8 unit sequentially scans all audio devices (10 scans per second), automatically labelling them with digital addresses. RDNet is not only designed for loudspeakersâyou can control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers. A network user can change level, delay, EQ (linear phase FiR as well) and other settings, including advanced subwoofer configurations.
Each device has DSP to address specific presets or modifications of parameters to single or groups of objects. Based on a proprietary network protocol, RDNet provides intuitive control and monitoring of every connected device/object in the RCF audio system. NETWORKED CONTROL AND MUCH MORE RDNet is a robust management network and control platform for small, medium and large arena-sized sound systems, as well as complex and extended installations. RDNET is a âreal-time” system: Information relating to the functioning of the devices is acquired in real-time, a feature that allows a global view of connected devices. The network and devices configuration can be saved as file in the PC and later reloaded. From PC it is possible to check the operating of each single device connected to the network and edit its parameters output level, mute, equalization, delay, etc.
#RCF RDNET CONTROL 2 INSTALL#
For the RDNET network operating, it is necessary to install the appropriate Software on PC, on Microsoft Windows® environment.
Each device is assigned a unique address during the power on procedure of network. The addressing of the various devices is handled automatically by RDNet Control 2 interface. Up to 32 devices can be connected to each subnet (2 subnets x 32 = total 64 devices). The RDNet Control 2 unit can manage up to 2 subnets. The RDNet system was purposely developed to create a data network for monitoring and command of more systems. The RDNet Control 2 is an hardware interface to connect RCF RDNet compatible devices (TTL55-A, TT元3-A II, TT元1-A II, etc.) to a Personal Computer (PC) by means of an USB connection.
0 kommentar(er)
